The printer then needs something to calibrate and make the initial settings. I also tested the WLAN integration and exactly the same procedure. The setup wizard guides the user to their destination quickly. Before putting the printer into operation, you have to remove the plastic protection from the toner. This has turned out to be a bit awkward and for someone who likes it very comfortable may be a bit too complicated, so a small point deduction. Due to the LED technology, the Kyocera Ecosys M2030dn is a bit faster than my old printer.
When copying I had no problems so far, works just as smoothly as the scan and the print quality is also pretty good. I have the Kyocera Ecosys M2030dn printer incorporated as a fax, but not in use, so I can only say that the device on the printer and the FritzBox 7490 has worked properly. One should only make sure that the settings in the telephone system are set correctly. Yes, because the price-performance ratio is almost unbeatable. But you should first think about whether the running costs for replacement toner are not too high. Of compatible third-party toner, I would leave the finger, as this is a LED printer and not a laser printer in the classic sense and the printer needs special finer toner pigments.